CGI HTTP Command for Sunba Illuminati

 

The commands below is only for model Sunba Illuminati.

Assuming we have a camera with IP as 10.16.112.226，username as admin and password as abcd1234, its corresponding http commands will be as follows:

Pan Left：http://10.16.112.226/ISAPI/Custom/ptz/pan-left?authInfo=admin:abcd1234

Pan Right: http://10.16.112.226/ISAPI/Custom/ptz/pan-right?authInfo=admin:abcd1234

Tilt Up: http://10.16.112.226/ISAPI/Custom/ptz/tilt-up?authInfo=admin:abcd1234

Tilt Down: http://10.16.112.226/ISAPI/Custom/ptz/tilt-down?authInfo=admin:abcd1234

Zoom In: http://10.16.112.226/ISAPI/Custom/ptz/zoom-tele?authInfo=admin:abcd1234

Zoom Out: http://10.16.112.226/ISAPI/Custom/ptz/zoom-wide?authInfo=admin:abcd1234

Stop PTZ: http://10.16.112.226/ISAPI/Custom/ptz/stop?authInfo=admin:abcd1234

Call Preset 1: http://10.16.112.226/ISAPI/Custom/preset/1?authInfo=admin:abcd1234

Call Preset 2: http://10.16.112.226/ISAPI/Custom/preset/2?authInfo=admin:abcd1234

………

Call Preset 255: http://10.16.112.226/ISAPI/Custom/preset/255?authInfo=admin:abcd1234

Take a Snapshot: http://10.16.112.226/ISAPI/Custom/snapshot?authInfo=admin:abcd1234

Reboot: http://10.16.112.226/ISAPI/Custom/reboot?authInfo=admin:abcd1234

All HTTP commands urls above will include username and password as required entries. We are unable to make http commands without credential.